MotioninJoy ver 0.3.00 is available
Submitted by Acxie on Fri, 10/09/2009 - 04:31
Tagged:
MotioninJoy ver 0.3.00 is available today.
Pease refer to http://www.motioninjoy.com/update/log
The install files upload to download page.
If you have installed pre-version folllow way is fast then download install files:
There are some compatibility problems in 0.2.00 or older version's updater .
If you failed to update files:
- You can download the attachments(http://www.motioninjoy.com/sites/default/files/DS3_Tool.zip) only 28kb size.
- Uncompress the file,you will get a file name ase "DS3_Tool.exe"
- Replace DS3_Tool.exe (difault in C:\Program Files\MotioninJoy\ds3\DS3_Tool.exe)
- Run DS3_Tool.exe select "about" tab and click update button.
- DS3_Tool.exe will download and Replace some files in corresponding location.
- After DS3_Tool complete updateing,unplug you dualshock 3 or sixaxis and replug again.
Please give me some feedback.
| Attachment | Size |
|---|---|
| DS3_Tool.zip | 28.44 KB |
- Acxie's blog
- Add new comment
- 27483 reads
Comments
POINT OF HAT
everything is working great but is their any way i can disable the
point of hat option so i can asign the d-pad to actual commands for pc
games ?
so many axis to map
I know that the windows driver for gamepads only supports 8 axis, but can you enable the simulation of two gamepads with one sixaxis controller, so that more axis can be mapped and used in games?Your sixaxis configuation only maps four of the axis into the virtual gamepad, but i need all 6. please let me map those axis manually.
Bugs & Requests
Hi there.
There are few problems with DS3 Tool.
1. I have to be connected to the internet to see anything????
2. Buttons 9, 11, 12, are not true (Profiler vs. Control Panel).
Select=9, L3=11, R3=12 <- correct.
3. Buttons L1, R1, L2, R2 are not true (Wrong Button).
L1=7, R1=8, L2=5, R2=6 <- correct.
4. Right Stick, Up & Down should be Z axis by default.
5. Right Stick. Left & Right should be Rz axis by default.
Requests:
--------------
* If you can include a "Battery Metter" (like BtSix)
That would be perfect.
* If I could install ONLY the Bluetooth drivers... without
the USB drivers (again like BtSix [sorry]) so I can see the DS3
charging when plugged in the usb.
And use the usb ONLY for Pairing. that would be Perfect.
* My laptops built-in Bluetooth 2.0 installs but not working.
(The Device ID is OK)
Thank you very much.
P.S.
Everything works perfectly. :)
Load my Profile Automatically
Is it possible to load my Profile button configuration automatically when I start DS3 Tools?
The reason is that I also use "PS2 to USB Adapter" and all my games are set to its button Mapping.
Or a better solution would be if you guys (developers) implement the Standard Mapping of all the PS2 to USB adapters in the Default which is:
L1 = Button 7
R1 = Button 8
L2 = Button 5
R2 = Button 6
L3 = Button 11
R3 = Button 12
Select = Button 9
Start = Button 10
PS = Button 13
Everything else is right.
Thank you very much for your efforts.
ps3 turning on automatically
hmm somethin interesting been happening. Everytime I unplug the controller from the USB when Im done using it my PS3 turns on.??
Turn your Ps3 off from the
Turn your Ps3 off from the back switch and that wont happen
PS3 Slim doesn't have a switch in the back...
In which case, keep a paperclip handy. Hit the reset button on the back of the controller with the paperclip, and unplug before the controller turns back on again. (You'll have about 3-5 seconds)
that happens to me too
that happens to me too
Motioninjoy with 2 BT dongles
Will MotionInjoy work with 2 BT dongles? If so can I have two PS3 controllers connected and working at the same time?Thanks.
After updated new version, I cannot charge DS3 at PC
After I updated new version, I cannot recharge DS3 power by computer USB port. Is it my mistake or something wrong?I love your DS3 driver and wish the driver will be improve the more powerful driver.
problem
in my case, the DPad y axis UP is always on and the 2 sticks not work.
analogs not work with bluetooth
after the update, with bluetooth, analogs not work. R2 and L2 are works as button. (in options page i have tried analog gamepad 1 and 2 nothing changed.)
x64 Vibration
Does this version support vibration on x64?I just don't want to upgrade otherwise.Thanks.
Yes mine works perfectly
Yes mine works perfectly under win 7 64bit.
How did you do..
Also running windows 7 x64 and cant get it to work.Did you install the vibration package or what did you do?
Now WHQL :)
Too much to dream to get certificated driver , at least without Driver Signing problems in x64's :)
Motioninjoy ver 0.3.01?
Downloaded update through motioninjoy program and wondered what the difference is? seen no log about it..
Motioninjoy displays ver 0.3.01, but see no difference and have the LED blinking forver problem on my ds3 via usb.
After DS3_Tool complete
Whats the difference?
I have Windows 7 x64 and i used the controller by BT when updated... I wonder what the update changed as i have not seen any new log or post about it... only difference i think i have noticed is that the controller no longer shows up as Direct X rumble compatible in my pcsx2 emu...
http://www.motioninjoy.com/up
http://www.motioninjoy.com/update/log
awesome update, works great.
awesome update, works great. now for 2 controllers to 1 bluetooth dongle please!
Developing
Developing
great news! we look foward to
great news! we look foward to it
How do you turn off the controller?
I got everything to work, i just dont know how to turn off the controller after i use it on my pc.
Just press the PS logo for 3
Just press the PS logo for 3 seconds. After that the red lights will turn of.
Hi, I got everything working
Hi, I got everything working vibration and the triggers in Xinput. Except that I have to load the Profile everytime I restart my PC. So my question is: is it possible to auto load the profile that I have configured everytime when I startup Windows. Not a big deal if it's not possible. Thank you in advance.
Vibration
Still can't get vibration to work. In fact, I have never gotten it working with any drivers I've found. Using Win7 x64. Not a BIG deal, but would be nice to have it. I'd also like to see some analog triggeres that don't use the same axis (so you can use both at the same time) but whatever.
have you tried this driver h
have you tried this driver h t t p://www.motioninjoy.com/uploadfiles/MotioninJoy_vibration_0100.rar as it is working for me. also for analogue triggers, set the options to analogue Pgamepad 2 (pov, joysticks, analogue trigger) and go into profile and change L2 to game controller axis - dial axis increase and R2 to game controller axis - Slider axis increase. go into game controllers under control panel and recalibrate controller and check its working. works fine in need for speed shift. if your using the xbox360 emulator, you'll have to change a few lines as well. i'll post them if you want me to
I'll try that, thanks. And
I'll try that, thanks. And yea, I'm using the Xinputemu to emulate a 360 controller in games, so if you have the config, post it please.
changes
ok change the following lines: "Left Trigger=s1" "Right Trigger=s2". use the xinputtest.exe to check it works.
Thanks!
Thanks for the Xinput stuff. Still can't get vibration to work, but It's nice having analog triggers (although I forgot to calibrate it first, so when I went to try stuff, the trigger was stuck half way, lol). Thanks again.
Calebration
Hi, i have the same problem, the triggers are stuck at 50% all the time, how did you fix that, i couldn't figure out how to do that using the controller control panel.thanks
Read my post here
Read my post here http://www.motioninjoy.com/forums/viewtopic.php?p=757#p757
error
ok, nice update but i have 1 problem, now and again the program crashes with APPCRASH with the following file causing the problem mscworks.dll.
Microsoft dotNET 3.5.
Require Microsoft dotNET 3.5.http://www.microsoft.com/net/Download.aspx
Nice update!!But I still
Nice update!!But I still can't manage to get the auto load config feature to work. Every time when I want to save the MotioninJoy profile, I get a script error.When I want to save I get:Line: 215Char: 2Error: Token StartElement in state Epilog would result in an invalid XML.
Yes, the same error....
Yes, the same error....
have fixed the problem.
Please selcect about tab and click "Check Update" button.
Serious Problem With New Update
Hi Axcie, Firstly i must say thanks for your amazing work on these drivers. you are a LEGEND. :)
Now the problem is that the new update doesnt work on Windows Vista Ultimate 64Bit. i installed the new version and my controller doesnt get recognised by Windows, or the driver program, and the only way for Windows to see it again is when you chage its USB port. so now i cant use my controller! help!
By the way i am running Vista Service Pack 2 and i dont know if that has anything to do with it, so please help :)
if you fix it please let me know
Jord47@gmail.com
Thanks your feedback
I will test it and try to fix this problem.
Install USB Driver.EXE
Where'd i get that file? Can't find it and it's not contained in your new Update.. Please help...
Its name is
Its name is "MijCmd.exe".After you install it wil be in(default C:\Program Files\MotioninJoy\ds3)But you have to run as administer and command like( "C:\Program Files\MotioninJoy\ds3\MijCmd.exe" /i .\drivers\MijUfilt.inf)There is no any effect if you only double click to run it Directly .
thanks
thanks for the update but still praying for 2 x BT
Analog buttons not working
So, I´ve installed the 0.3.00 drivers...everything works great...except analogs! (by that i mean: two joysticks,motion sensors and triggers)...than i tried to go back to the old 0.2.00 drivers that worked great anyway...just to find out that whenever i uninstall this new drivers and install again the old ones...nothing changes...i still have the 0.3.00 new main window (and new drivers obviously..becouse i cant use analogs still)...don´t know what to do...can´t delete them...I´m using Win 7 64 ...(everything is same on Bluetooth or USB)
Maybe you did not exit the main window
Maybe you did not exit the main window before installing,
because installing progam can't replace runing files.
BTW I still suggest you to update.
about analogs problem:
I think you did not replace MijBThid.sys and MijUfilt.sys really or not unplug and replug your device.
Had the same problem with
Had the same problem with joysticks not working. But when I set the key config back to default and reconnected everything works. As long as I dont change keys... But anyway great job again!
Updated today
Tried the new update today(windows 7 ultimate x64) Usb worksBt worksBut having a hard time getting the joysticks to work. (D-pad works though) Two controllers on BT still don't work, 1 controller on usb + 1 controller on BT works. Anyone know a solution for my joystick prob ? Cheers Pets
I've tried it in USB mode and
I've tried it in USB mode and it is now definitely perfect:Analogs now works, also rumble and led linkin problem is not happening. Using Vista 64.¿Is there now support on Bluetooth mode for any built-in bluetooth adapter? Yup, I have a laptop...Anyway, GREAT job.
BT Works great on my laptop I
BT Works great on my laptop I have a Sager M860TU.
USB adapter only as before
USB adapter only as before