Motioninjoy 32bits version update with game controller remap options and vibration function

Hey after a few wrong turns i got this to work, havent managed to work out the bluetooth pairing yet but the fact that it works is a plus and bluetooth will be a bonus give my thanks for the hard work in makin these drivers

Hi, I installed this on a vista 32 bit, upon plugging in the DS3 windows installed a driver, I then updated the driver using your program together with the bluetooth driver however after reboot the device could not be detected both the DS3 and bluetooth dongle.

2009-06-05 00:28:05

1)Run DS3 TOOL

2)select corresponding options

3)click "enable options" button

ipvideo

2009-06-06 04:34:40

When
I select the Analog Gamepad2 Option, the right analog stick stops
working correctly because the axis is taken by the triggers.

When I select the Analog Gamepad3 option, the triggers are digital again. I'm using Windows XP SP3.

Jack

2009-06-07 00:00:12

My
computer with winxp sp3 frezzes when i install the new usb driver...
the bt is fine, but the usb locks up the computer, i have to unplug the
controller to be able to start xp at all after install of driver...

rallymoose

2009-06-08 13:14:40

Software and drivers got installed successfully as instructed, but my game pad won't work with BT.

I am running Vista SP1, and .Net 3.5 is also installed.  BT is new
2.0 version from Iogear as well.  Everything seems fine, I even got BT
controller listed in my control panel, but just not functioning. 
Imcompatible BT device I got?????

Any brand is suggested?

Stan

2009-06-10 17:07:35

If you have a laptop with bluetooth enabled, do you still needa usb bluetooth dongle? Im confused.

NOOB

2009-06-10 17:09:52

I get a txt file stating:

INFO:MotioninJoy Driver install log

INFO: Driver install Enter

INFO: argc0="C:\Program Files\MotioninJoy\ds3\MijCmd.exe"

INFO: argc1="/i"

INFO: argc2=".\drivers\MijBThid.inf"

INFO: DriverPackageInfPath="C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf"

INFO: >>>>>installing driver package.

LOG Event: 1, ENTER:  DriverPackageInstallW

LOG Event: 2, DRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.

LOG Event: 1, Looking for Model Section [Vendor.NTx86]...

LOG Event: 1, No matching devices found in INF "C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf" on the Machine.

LOG Event: 1, RETURN: DriverPackageInstallW  (0xE000020B)

INFO: There aren't any live devnodes with the DeviceId contained in the INF.

 

NOOB

2009-06-14 15:39:10

hi i have a big problem, the downloadable package is corrupt. You should upload it again

2009-06-14 16:20:56

Yea
i tried downloading it too, and when i try to open or extract the
archive with winrar or 7zip it says the archive is corrupt. I tried
downloading it several times but with no success. Pleas can you upload
the 32-bit drivers again. I really want to use the motion tetection
axes to use the controller as a steering wheel.

Brunzito

2009-06-15 16:52:26

I have try it again,there is not  problem on my side .

ipvideo

2009-06-17 10:32:36

Does this works with the built-in bluetooth adapters that some notebooks have?

Fred

2009-05-28 03:27:23

finally
I managed to install this driver, th eproblem (windows vista 32) is
that when you try to set the joystick type with DS3 TOOL it throws up
error.

************** Exception Text **************

System.AccessViolationException: Attempted to read or write protected
memory. This is often an indication that other memory is corrupt.

   at MotinoinJoy.Dualshock3.FindTheDevice()

   at MotinoinJoy.Dualshock3.setOptions(Byte maptype, Byte vibration)

   at MotinoinJoy.FormMain.EnableButton_Click(Object sender, EventArgs e)

   at System.Windows.Forms.Control.OnClick(EventArgs e)

   at System.Windows.Forms.Button.OnClick(EventArgs e)

   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)

   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)

   at System.Windows.Forms.Control.WndProc(Message& m)

   at System.Windows.Forms.ButtonBase.WndProc(Message& m)

   at System.Windows.Forms.Button.WndProc(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Uou can click continue and repress the Enable Option button but it's annoying nonetheless!

Mihai Olimpiu

2009-05-28 03:48:07

Tried installing and got this error.  (i didnt have any ds3/sixaxis drivers on her already)

Cannot find the C:\Program Files\MotioninJoy\ds3\Mijlog.txt file.

Do you want to create a new file?

I'm running vista 32bit, and i can't continue.  I tried just
skipping this step but the red lights on the controller just blink and
blink and blink.

Kashgar

2009-05-28 04:02:46

 Okay, so I went into the program files and ran 'MijCmd.exe' as an administrator, and then a text file came up saying this:

INFO:MotioninJoy Driver install log

INFO: Driver install Enter

ERROR: argc < 2

Kashgar

2009-05-28 09:20:53

 step 5, run it as administrator(Start->All Programs->MotioninJoy->Install USB driver)

ipvideo

2009-05-28 18:10:27

I have update the DS3_TOOL .

ipvideo

2009-05-28 22:45:18

i plug my bluetooth dongle, but my OS does not install the default driver, how can i get that drive?

my OS : XP with SP3

arst

2009-05-29 00:12:24

Installed succsesfully but there is no response in the test menu, even after updating and configuring the DS3 Tool

Stealth_gamer

2009-05-29 00:12:34

Hi, first of I would like to thank you for this GREAT DRIVER! (No need to buy another gamepad)

Now to get to the point:

VISTA x32 system, installed correctly, working great, only real
thing you have to be carefull is to RUN AS ADMINISTRATOR! The program
is almost self explanatory!

Downloading "MotioninJoy_0100_x86" as I mentioned in the first post
throws a error when running DS3_TOOL.EXE. If you want that small error
fixed, run DS3_TOOL and click UPDATA (by the way it should be Update
Program) and the program updates itself with no proplem whatsoever!

2009-05-29 05:41:36

i followed the steps but when i run the ds3 tool to update its says the updater has stoped working

2009-05-29 06:46:41

I installed the drivers, but when I try to run the ds3 tool on xp, I get a 0xc0000135 error code.