PS3 sixaxis&dualshock 3 driver on Windows x64 Instructions

It’s a good enough information connected with study. People would like to have such kind of perfect talent. But they must purchase the english thesis proposed by some distinguished dissertation.

after i install the program my dualshock was recognized and able to use, but some how my right analog stick is reverse. where left right become up and down and up down become left and right, could anybody with experience tell me what did i do wrong? beside the right analog stick everything works fine 

My controller doesnt function when I start a game (COD4) I have pasted all the tests and the controller is connected but doesnt work in game.I'm using a dual shock 3.

Hello,I've got everything to work, except for the bluetooth pairing...I've got the latest motioninjoy version en running it with win7 x64.Through USB everything works fine, but i can't get bluetooth pairing to work.In the motioninjoy @ bluetoothpair i got my controller connected trough USB (like asked) then i press pair and it says it's paired. Anyway, when i disconnect the controller it says nu can't find connected (USB) playstat(..)When i press the blue tellters '' PS3 BD Remote Control Pair and then query remote (press and hold enter and start ((enter @ pc?)) it always times out...Anybody got the solution?Thanks in advance

http://blogs.ign.com/Blogs/Comments.aspx?blog=winter123&entryid=139479

I cannot find this sixds3.inf file. I am not sure how can I get it. Help :)

I followed the instructions under Win 7 x64 and have it recognized and functioning (somewhat).  The one and only game I have tried (Wolfenstein) was setup all right except the right analog stick (Z axis) is backwards.  Moving side to side looks up and down and moving up and down looks side to side.  I don't know if this is an easy fix, but I can't seem to find where I could change that.  Can anyone help.  I am using the Analog Gamepad 1(POV, Joysticks) setting.  Thanks.

Hiya,First of all thanks for providing a way to use the ps3 controller on a pc.Unfortunately I have the same problem as George.I have Windows vista 64.  I installed the driver and in control panel the ps3 controller is recognised and i can press buttons/move thimbstick and this is shown.However when i try to play oblivion it does not recognise that any controller is attached.Any ideas on how to get oblivion to allow me to use the ps3 controller?Thanks

2009-07-18 17:37:49

hello,

i finally got it to work on vista 64bit, but when i try it with
Crysis the game doesn't even show that there is a controller connect
it, in the control panel, the game pad setting work perfectrly please
help.

Georges

GeorgesN.

2009-07-19 20:09:26

I want
to have your ####ing children. ##### ####ing #####. Thanks to the magic
of (Computer) SCIENCE, I'm now playing my PSP on my PC, using my DS3.
Once I get the whole bluetooth thing working, I'm just going sit inside
all day drooling at my screen.

The D

2009-07-20 12:49:04

Hello .. here you can see
my best http://www.lovelybrooke.com/mmb/060202a/index125_kmcpux_a.html girlfriend ever haved
Cya !

!!!##Blurburbats

2009-07-24 01:36:49

Great post! I’ll subscribe right now wth my feedreader software!

LnddMiles

2009-07-29 00:13:57

Hi
, I manged to make it work, the only problem its the analog sticks
dosent work.. only the D-Pad.. ?!? What Can I do to enable the Analog
Sticks ?!? Even when I calibrate .. its dosent move.. Please....

Thank you.

Munnn

2009-05-25 11:19:19

Yeah, I
would love to be able to disable the sixaxis so I can map buttons
without it detecting the motion right away. Other than that, everything
seems to work fine. If anyone figures out how to disable the motion
detecting, that would be fantastic.

2009-05-28 23:13:42

2009-05-29 11:58:31

im not able to download the driver. its says : page not found.

taimoor

2009-05-29 19:02:58

If you can't get the Driver Signature Enforcement Overrider
program to sign your drivers or are having trouble entering test mode
and you don't feel like using the F8 workaround each time you boot,
check out this thread... Im using Windows 7 Build 7127 x64 and the
method does work

http://www.rage3d.com/board/showthread.php?t=33920573     

  (It might seem complicated but it is very simple and easy to follow)



Important Note:

Instead of
downloading the entire Windows Driver Kit (700 MB) you only need to
find these four files: capicom.dll, certmgr.exe, makecert.exe,
signtool.exe (only 700 KB)

Microsoft doesnt let you download these files alone nor do I condone
doing so but, Im sure google will point you in he right direction

Note:

This Method did not produce the "Test Mode" watermark on my desktop either!



Once you get the driver working download Xpadder to map your PS3 controller buttons

TechN9ne

2009-06-03 03:16:06

I have again problems with my controller ... The sticks moves automatically.... HELPPPPPPPPPP

2009-06-03 10:43:40

I
can't tell which it is in the Device Manager because there's literally
like 5 USB Human Interferance Device slots. Does it matter which one
I pick? I did everything as follows but it simply does not work for me.
No error message or anything.

2009-06-03 13:56:32

It
does matter which one you choose, you have to look at the hardware id's
and find which Human Interface Device has the Hardware ID Values:

USB\VID_064C&PID_0268&REV_0100

USB\VID_064C&PID_0268

These can be found by going to device manager, then right click one of
the USB input devices (under Human Interface Devices). Then click
"Properties" Now click the "Details"  tab at the top, and then click on
the Property drop-down menu (the menu should initially read: Device
description) and scroll to "Hardware Ids" (the second option usually).

Finally just compare the Hardware Id values above with the ones listed
for your devices, the device that matches is the one you want to
install the driver for.

Hope that helps...It may also be useful to unplug your other USB peripherals except for the PS3 controller before you begin.

TechN9ne

2009-06-07 00:36:09

Everything works fine except for the right analog stick, it doesn't detect up and down movement. Any ideas?

2009-06-09 01:45:06

it's possible to use two ps3 gamepad in the same time connected with usb? if yes, can you tell me what i do?

sorry for my bad english

thanks

bye

Lorenzo

2009-06-11 03:31:56

hello,
usb works fine, but BT not, i have 2 usb adapter and cant work, i tried
add BT address USB\VID_0A5C&PID_2039 and USB\VID_0C10&PID_0000
in MijBThid.inf. When i run Motionjoy BT installer i got this log:

INFO:MotioninJoy Driver install log

INFO: Driver install Enter

INFO: argc0="C:\Program Files\MotioninJoy\ds3\MijCmd.exe"

INFO: argc1="/i"

INFO: argc2=".\drivers\MijBThid.inf"

INFO: DriverPackageInfPath="C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf"

INFO: >>>>>installing driver package.

LOG Event: 1, ENTER:  DriverPackageInstallW

LOG Event: 2, DRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.

LOG Event: 1, Looking for Model Section [Vendor.NTAMD64]...

LOG Event: 1, Installing INF file 'C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf' (Plug and Play).

LOG Event: 1, Looking for Model Section [Vendor.NTAMD64]...

LOG Event: 1, Installing devices with Id
"USB\VID_0A5C&PID_2039&REV_0100" using INF
"C:\Windows\System32\DriverStore\FileRepository\mijbthid.inf_63935cd5\mijbthid.inf".

LOG Event: 1, Will force install because driver is not better and force flag is set.

LOG Event: 1, ENTER UpdateDriverForPlugAndPlayDevices...

LOG Event: 0, RETURN UpdateDriverForPlugAndPlayDevices.

LOG Event: 1, Installation was successful.

LOG Event: 1, Installing devices with Id
"USB\VID_0C10&PID_0000&REV_1500" using INF
"C:\Windows\System32\DriverStore\FileRepository\mijbthid.inf_63935cd5\mijbthid.inf".

LOG Event: 1, Installation did not occur because the hardware isn't currently present.

LOG Event: 1, Marked Phantom Device with Hardware/Compatible Id
'USB\VID_0A5C&PID_2039&REV_0100' for reinstall on next plug-in.

LOG Event: 1, Marked Phantom Device with Hardware/Compatible Id
'USB\VID_0C10&PID_0000&REV_1500' for reinstall on next plug-in.

LOG Event: 0, Install completed

LOG Event: 1, RETURN: DriverPackageInstallW  (0x0)

SUCCESS: installed package C:\Program Files\MotioninJoy\ds3\drivers\MijBThid.inf.

 

Someone can help me?

Thanks!

Felipe

2009-05-12 04:44:47

Works great. And unlicje the libusb64 workaround this doesn`t make the PC BSOD.

Awesome driver!

Thoemse

2009-05-12 06:24:43

For those of you with Error 10, make sure you are installing drivers for USB Input Device and not the HID Game Controller.

Shadow Cloud

2009-05-12 08:52:21

That's what I was doing wrong Shadow Cloud, thanks very much!

harry

2009-05-12 22:39:34

 Worked
yesterday, woke up this morning and booted up my system, not changed
anything and it doesn't work. Error code 39 :P Reinstalled and now keep
getting error code 39. I've not done anything differently to the
procedure i followed yesterday, which worked :P

Andy

2009-05-12 23:06:30

got
this to work today, but i think the motion feature needs some
reconfiguration ... i cannot get this to work with any application that
automatically tries to find out which button im pressing, because the
axis that present the movement of the controller do always give a
signal first. please fix this, id really like to use my controller with
some games!!!

christian

2009-05-13 08:57:05

Works great, keep up the good work!

DW

2009-05-13 10:40:02

The
drivers are working perfectly for me, thanks a lot. I have a request,
could you make drivers that don't track the motion sensor and make the
triggers an analog axis instead of buttons so it could be a fully
functioning game controller? The drivers would be absolutely perfect if
you would. Thanks a ton, I've been for 64 bit drivers for a while now
<3

To christian: you may be able to get around that a little bit by
holding down the button you want to be used when you click the button
to be assigned and moving the controller around so that it registers
the button you want.

Jon

2009-05-13 22:15:05

is
it possible to disable the motion sensing? whenever i try to map the
controller the motion sensing ends up getting in the way, even if the
controller is sitting on a level surface

fleetscut

2009-05-14 08:58:53

i think i've done this right. i've tried several times and keep getting code 39

2009-05-14 09:14:13

i take back that last comment got it to work just have to follow the instructions

2009-05-10 05:33:28

Strange, I
reinstalled Windows 7 64-bit for the RC version and now I can't use the
driver. I'm getting the same as other people with the "Code 10".

2009-05-10 09:36:39

Surely that must mean it's only Windows 7 BETA releated?

harry

2009-05-10 15:57:19

Works
perfectly on Windows 7 RC x64 with my Sixaxis, thank you!! PS: When
downloading the drivers from the first link, the first and second time
it just downloaded a 120KB file, so I tried again and finally got a
complete 1,60MB rar file. That could be why many of you get an error,
so try checking the size of the file. ;)

Clerish

2009-05-10 17:30:01

cannot work on Vista SP2 64bit...

have tried lots of ways refer on this site...

hope it can fix someday :)

2009-05-10 23:30:50

fofor you haveing problems, try check: www.techspot.com/vb/topic127187.html (solution 2).

It may be that you forgot to add the bootlag outlined in that step.



Just an idea.

rallymoose

2009-05-11 03:35:05

Works perfectly for me. Vista Ultimate 68bit.

And, is that the Sixaxis motion that's working,

or am I hallucinating...?

lilmetal

2009-05-11 08:14:08

no you're just a fortunate son of a bitch.

harry

2009-05-11 11:56:22

2009-05-11 11:56:52

Doodles

2009-05-11 12:45:19

Done everything right still no go. Error code 10. windows7x64 RC 7100. Please fix it.

cenol

2009-05-05 20:00:13

Still doesn't work to me with DS3, even with the program.

This is what is written under driver status: "Windows cannot load
the device driver for this hardware. The driver may be corrupted or
missing. (Code 39)"

Sov

0000-00-00 00:00:00

you must do step 3 correctly.

ipvideo

2009-05-05 20:03:29

I did, but it still didn't work.   F8 and "disable driver signature enforcement" didn't work either.

I assume the problem isn't necessarily with the driver signing..

Sov

2009-05-05 20:59:07

if
you use F8,you need setp3 "a.use it to sign
'C:\WINDOWS\system32\drivers\MijUfilt.sys' ". only do not need " b.
Enable test mode"

ipvideo

2009-05-05 22:51:27

Still doesn't work, same error message :(

I also tried reinstalling it multiple times while repeating the steps.

I'm really not sure the error is signature-related.

Sov

2009-05-06 02:32:33

maybe some files need,I will check it again

ipvideo

2009-05-06 02:34:01

Sov , I have updated the files, please test again.

ipvideo

2009-05-06 04:19:40

I used
the updated files dated 5/6/09 2:19AM and I think I did everything
right using the dseo program on Windows 7 RC.  But I get an error in
the device manager saying that the "device cannot start" and indeed the
DS3 won't turn on.

When I right click on the .sys file I can see the NGO signature, but
in device manager it says it isn't signed under the driver information
page.  Maybe that's it?

Or is this driver incompatible with Windows 7?

I think some people are getting this to work so thanks for your hard work.

2009-05-06 11:10:50

I
am running Windows Vista 64-bit.  I used the same updated files
(5/6/09), used the DSEO tool to successfully sign the driver and run in
test mode, but the drivers still do not work.  The driver status says
"This device cannot start. (Code 10)".

The lights blink on the controller indicating that it is charging, and pressing the PS button does nothing.

:(

CJ

2009-05-06 13:08:56

hi,all

I have installed my vista 64bit  system again by way of testing this driver.

only  winrar for unziping the  file from www.motioninjoy.com/uploadfiles/www.motioninjoy.com_sixaxis_dualshock3_64bit.rar,it's not  other software except windowself.

when I  Update the driver In Device manager ,windosw warns me. and
there is a error "Windows cannot load the device driver for this
hardware. The driver may be corrupted or missing. (Code 39)"

reboot my computer with F8("disable driver signature enforcement" )

check the Device manager ,the error "Windows cannot load the device
driver for this hardware. The driver may be corrupted or missing. (Code
39)" cleared away.

after PS button  it can work.

I don't know why of "This device cannot start. (Code 10)".

ipvideo