Download the appropriate drivers from download page .
Unrar or unzip the file.
Run the install program. follow the setup steps.By default it will place the drivers and software in "C:\Program Files\MotioninJoy\ds3".
in your Playstation 3 controller(Sixaxis or Dualshock 3). If you
haven't done this before, you will see that some basic Windows drivers
From the Start button,run the "Start->All Programs->MotioninJoy->Install USB driver".Make sure to right click and "Run as administrator"or The driver will not install properly if your system is x64,before you do next step.
your system is 32bits windows skip this step. Restart Windows-when it
starts to boot up again repeatedly press F8 key just after the BIOS
does its POST.Select "Disable Driver Signature Enforcement".
Unplug the other USB bluetooth dongls if any except the one you need to
connect sixaxis or ds3.After windows install its default driver, right click(Start->All Programs->MotioninJoy->Install Bluetooht driver)run as administrator. If need to use other bluetooth dongles, just plug it in after installation finished.
If your system is 64bits windows do step 6 again.
Start->All Programs->MotioninJoy->DS3 TOOL(request Microsoft dotNET 3.5),click "Pairing" button.
Unplug the USB wire,press Playstation 3
controller's "PS" button shortly to connect via bluetooth,The LED of
"1" will always light after connected,dualshcok 3 will vibrates a
Seclect options that you hope and click "Enable Options" button.
Enjoy your windows game.
Long press Playstation 3 controller's(sixaxis' or dualshcok 3's) "PS" button to disconnect.