Dual shock 3 x64 vibration function package
Submitted by Acxie on Wed, 07/29/2009 - 01:12
Tagged:
- Install the pre driver ,refer to 64bits driver update with remap options.
- Unrar MotioninJoy_vibration_0100.rar. follow the setup steps.
- Start->All Programs->MotioninJoy->DS3 TOOL selcet "Enable vibration" and click "Enable Options" button.
- Enjoy your game with vibration function.
- Acxie's blog
- Login or register to post comments
- 38862 reads

Comments
WTF
all i get is a .rar file that i cant do nothing with can someone help me
prototype
hi.
4 prototype you need an xbox360 controller emulator.
watch this link:
http://www.motioninjoy.com/forums/viewtopic.php?f=15&t=155
2009-07-13 00:24:49 I tried
2009-07-13 00:24:49
I tried this version with Prototype , but the game still can not recongize my DS3.
But I indeed see the DS3 in "Devices and Printers" in my Win7 x64 and it works fine with SF4.
2009-07-14 19:10:30
there is absolutely nothing inside this package but the uninstaller...what the hell ?
dante, where IS your guide ?
2009-07-14 19:14:03
also,
if you want to run drivers in x64 vista/7, just use NGO's DSEO tool to
enable test mode and use it to sign any .sys file that is
unsigned...after those files are signed, they will work on ANY system
which used the NGO DSEO tool to enable test mode
2009-07-15 10:59:24
windwalker you need the xbox 360 controller emulator. I can't get the rumble to work in Prototype though
2009-07-20 02:54:32
this
worked right away; first try for USB on my vista x64 system. I started
playing some games and the controller did some weird stuff (the lights
(1234) had all but 1 lit up) and wasn't working. so I unplugged the
controller and plugged it back in, and now i can't get USB to work. I
switched to bluetooth and it works but it's still bugging me about the
USB.
any suggestions?
2009-07-20 05:56:02
Got
it working again! I was using BT for a while but decided to disconnect
using the hold PS button feature. It vibed off and then I unplugged and
re-plugged the controller in and pressed the PS button and it worked!
2009-07-23 20:32:51
2009-07-23 20:43:10
Couple bugs i found(in Windows7 64bit):
When in Analog Gamepad2(POV,Joysticks,Analog Triggers) mode the right joystick loses it's up/down data
When in Analog Gamepad3(POV,Joysticks,Analog Triggers,Motion sensor)
mode the analog triggers function as normal buttons not analog
Also the drivers seem to screw my bluetooth stack up. Once installed
the DS3 controller works but nothing else can connect to my bluetooth
device. My bluetooth device also disappears from my system tray and
device manager.
2009-07-25 17:12:27
Found another bug(i think)
The rumble doesn't seem to be able to remain active for more then
about 6-7 seconds at a go. If i set the rumble to go continuously it
only goes for around 6-7 seconds then stops and i need to tell it to
start again. I've tried with 2 different programs that can control
rumble to make sure it wasnt just the one program that was bugged.
Good luck and thanks for the drivers!
2009-07-03 02:59:09 Doesn't
2009-07-03 02:59:09
Doesn't work for me.
What should it install? I think it only installed two uninstallation files in C:\Program Files (x86)\MotioninJoy for me.
2009-07-03 04:58:22
you will not find me a pardon ipvideo ^ ^
2009-07-03 05:14:56
Dante,
I know it works with your method, but this setup didn't really change
anything. The file is much smalle and doesn't contain the tool of the
x86 version.
2009-07-03 08:37:16
2009-07-03 15:34:29
Cant seem to get this to work all it does is install a small .dat for and a uninst file Win 7 x64
2009-07-05 03:14:41
Same here UpLink. Also Windows 7 x64
2009-07-05 05:01:33
Works on my vista x64 with mega manx 8... it's my first time with rumble vibration on a PC :P
2009-07-07 10:35:23
ipvideo I don't know if this link will be of any help to you www.minasi.com/newsletters/nws0903.htm
2009-07-07 17:07:33
Thank ffffffff ,I'll check it.
2009-07-10 04:50:02
Ok
So it seems that it Still works only with those two files ever works
with xboxemu BUT not the application on the games with these drivers is
there a ways to turn the rumble up and down?
wow
does anyone realize if you turn on the vibration testing in the ds3tool... you can use your controller as a vibrator.